A Simple Technique for Determining The Maximum Ground Level Concentration of An Elevated Gaseous Release

A screening technique has been developed to determine the maximum one-hour ground level concentration of a gaseous emission from a stack located In flat terrain. The method does not require the use of a computer and eliminates the usual trial and error calculations. An infinite mixing height is assumed. It involves a linear or quadratic solution of the gaussian plume diffusion as a function of the effective stack height and a linear approximation of the Briggs plume rise equation. The linear approximation of the former gives results that are within 5 % of the gaussian plume results for stability criteria A, B, and C. For stability criteria D, the difference can be as great as 80%. If a quadratic estimation Is used, the differences are less than 3% for stability criteria A, B, and C, and are within 18% for stability criteria D. A linear approximation is used for the Briggs plume rise equation. This gives results within 4% of the Briggs equation. Overall, this is a simple straightforward approximation which gives results which can be used to determine if more sophisticated procedures are necessary.     

The Inadequacy of PSD Increments to Protect Visibility in Class I Areas

This study includes an application of the first two phases of a new three-phased decision-making structure that was developed to overcome the problems related to ecological safety and social justice in site selection applications. It was conducted on a current site selection problem related to the municipal solid waste disposal facilities in Kocaeli, the most industrialized region of Turkey. In order to assess the deficiencies of the legal site selection procedures related to ecological safety, two different decision tree modes were applied separately. The first mode (“Legislation”) concerns the current buffer zone applications given in the regulations, while the second one (“Proposed”) includes the applications of the new decision-making structure proposed in this study. Since it was assumed that the subjective tendencies of the decision makers on the weightings would have a significant effect on the final decision, these two modes were assessed by employing two different weighting models. The results were obtained from all of the scenarios related to selection of suitable sites with three different area requirements (15, 250, and 500 acres) for the solid wastes generated in the Kocaeli region. The results showed that the possible changes in the decision structure could cause significant differences in the final decision related to selection of the most suitable sites. The most highest and lowest differences were at the “Legislation” mode for 15 acres and 500 acres, respectively. Furthermore, the results obtained in the study showed that the possible differentiations in the criteria weightings could also cause significant differences in the suitability ranking. Therefore, to get a reliable final decision, a statistical assessment of these differentiations should be made.

Implications: The results showed that the possible changes in the decision structure could cause significant differences in the final decision related to selection of the most suitable sites. Furthermore, the results obtained in the study showed that the possible differentiations in the criteria weightings could also cause significant differences in the suitability ranking. Therefore, to get a reliable final decision, a statistical assessment of these differentiations should be made.     

Impact of “Designated Smoking Area” Policy on Nicotine Vapor and Particle Concentrations in a Modern Office Building

A series of measurements of nicotine vapor and particle concentrations were carried out in a modern office building. The measurement program was designed to document the impact of the new smoking policy (e.g. smoking restricted to two specific areas) on air quality in various parts of the building.

Measurements at over 30 locations examined areas where smoking was restricted, where smoking was permitted, and where an air handler shared the load of a designated smoking area. These measurements were taken at the same locations before and after the policy was Implemented.

The measurement results Indicated that: ? After the policy was implemented, general employee exposure to nicotine vapor (as a surrogate for all environmental tobacco smoke) was reduced by about 98 percent on most floors. Other patterns related to spillover from designated smoking areas and changes in the designated smoking areas themselves are described in the paper.

? Substantial reductions in exposure to nicotine vapor were found even for those general office areas which had the highest concentrations after the policy was implemented.

     

Transportation-Related Volatile Hydrocarbon Source Profiles Measured in Atlanta

Abstract

Samples representative of transportation-related hydrocarbon emissions were collected as part of the 1990 Atlanta Ozone Precursor Monitoring Study. Motor vehicle emissions were sampled in canisters beside a roadway in a tunnel-like underpass during periods of heavy traffic. Airport and aircraft emissions were approximated by canister samples obtained at a major airport facility. Three octane grades of gasoline were purchased from six major vendors in Atlanta. Canister samples were prepared using these fuels to approximate the whole gasoline and gasoline vapor composition of the fuels in use during the study. All samples were analyzed by gas chromatography/flame ionization detection (GC/FID) for their hydrocarbon content. Detailed speciated hydrocarbon profiles were developed from this source sampling and analysis program for use in the Chemical Mass Balance (CMB) model. Profiles presented and discussed here represent the hydrocarbon composition of emissions from a roadway, composite headspace gasoline at two temperatures, composite whole gasoline, whole gasoline at three octane grades, and an airport. The roadway profile is compared with similar profiles in the literature, and recommendations are made regarding its use in the CMB model. The roadway and fuel profiles are discussed in the context of the MOBILE5 model outputs. The headspace gasoline vapor profile presented here is compared with a headspace gasoline vapor profile calculated from the whole gasoline profile by means of Raoult’s law. Agreement between the measured and calculated headspace profiles is excellent. The airport profile demonstrates the importance of high molecular weight volatile hydrocarbons in airport and aircraft emissions.     

Effectiveness of Smokeless Ashtrays

Abstract

Most environmental tobacco smoke (ETS) issues from the tips of smoldering cigarettes between puffs. Smokeless ashtrays are designed to reduce ETS exposure by removing particulate and/or gas-phase contaminants from this plume. This paper describes an experimental investigation of the effectiveness of four smokeless ashtrays: two commercial devices and two prototypes constructed by the authors. In the basic experimental protocol, one or more cigarettes was permitted to smolder in a room. Particulate or gas-phase pollutant concentrations were measured in the room air over time. Device effectiveness was determined by comparing pollutant concentrations with the device in use to those obtained with no control device. A lung deposition model was applied to further interpret device effectiveness for particle removal. The commercial ashtrays were found to be substantially ineffective in removing ETS particles because of the use of low-quality filter media and/or the failure to draw the smoke through the filter. A prototype ashtray using HEPA filter material achieved better than 90% particle removal efficiency. Gasphase pollutant removal was tested for only one prototype smokeless ashtray, which employed filters containing activated carbon and activated alumina. Removal efficiencies for the 18 gas-phase compounds measured (above the detection limit) were in the range of 70 to 95%.     

Estimates of Particle Hygroscopicity during the Southeastern Aerosol and Visibility Study

ABSTRACT

Aerosol water content was determined from relative humidity controlled optical particle counter (ASASP-X) size distribution measurements made during the Southeastern Aerosol and Visibility Study (SEAVS) in the Great Smoky Mountains National Park during summer 1995. Since the scattering response function of the ASASP-X is sensitive to particle refractive index, a technique for calibrating the ASASP-X for any real refractive index was developed. A new iterative process was employed to calculate water mass concentration and wet refractive index as functions of relative humidity. Experimental water mass concentrations were compared to theoretically predicted values assuming only ammonium sulfate compounds were hygroscopic. These comparisons agreed within experimental uncertainty. Estimates of particle hygroscopicity using a rural aerosol model of refractive index as a function of relative humidity demonstrated no significant differences from those made with daily varying refractive index estimates. Although aerosol size parameters were affected by the assumed chemical composition, forming ratios of these parameters nearly canceled these effects.     

Comprehensive Area Surveys in New York State

The proposed By-law changes have been suggested over the last two years. They are basically housekeeping changes which correct the language, eliminate duplications, and clarify the dates for the receipt and acceptance of the ballots for nominees for the Board. The major revision proposed is in Article XV of the Technical Council which was necessitated by the new structure of the Technical Council approved by the Board of Directors in June 1970.     

Author’s Reply

A technique is developed to compute precision requirements for component parts of an emissions inventory to ensure (at a given confidence level) an overall acceptable precision in the estimate of total emissions. Since the emissions inventory is a basic requirement of air quality control implementation plans and provides a valuable management tool for planning air pollution control activities, it isi appropriate to state in quantitative terms the confidence that can be associated with each inventory. The approach reported here uses weighted sensitivity analysis methods to distribute both percentage and physical errors in source class emissions according to their contribution to the total emissions, and utilizes Chebyshev’s inequality to establish confidence levels for total emissions. The analysis has been extended to cover the case where one or more of the error components in a given inventory source class can be fixed by the analyst. The utility of the technique is manifold and several practical applications are reported. In particular, it serves to establish percentage error requirements for source categories to satisfy given error bounds for the overall emissions inventory at a given level of statistical confidence. The weighted sensitivity analysis technique possesses a high degree of generality, being applicable to compute component error requirements for any kind of data inventory which exhibits a hierarchical (tree-like) structure, as exemplified by NEDS Emissions Summary Reports. This work should be of interest to air pollution control planners at all levels of government and to anyone responsible for the air pollution portion of environmental impact statements.     

interpretation of air quality data with respect to the national ambient air quality standards

San Diego Gas &; Electric has developed a quality assurance program for continuous emission monitors (CEM). Extractive, rather than in situ, monitors were selected as a result of an in-house evaluation program. Two extractive systems have been certified and a good operating and maintenance record has been established on these systems. A successful program requires the involvement and support of all affected personnel. It is desirable to have one or two key personnel coordinate the development of the program. It is also highly desirable to have good in-house source testing capabilities.     

Solid Absorbent Method for Sampling and Analysis of Nitrogen Dioxide in Ambient Air

A sampling and analysis system was developed for measuring concentrations of nitrogen dioxide in ambient air. Copper shot was found to be an effective absorbent for collecting samples at ambient levels. The analytical system was based on the desorption of the sample from the copper by heating in a hydrogen carrier stream. The desorbed sample was then determined by a combination of catalytic pyrolysis, which converted it to ammonia, and a Coulson Conductivity Detector. Data are presented showing overall recovery, effects of storage of collected samples, results for 24-hour sampling and interferences. Studies indicated the feasibility of the method for short time sampling as well as for 24-hour sampling periods. The detection limit was shown to be as little as 100 ng NO₂ in laboratory studies. This solid absorbent method provides a simple, convenient, and compact means for air sampling.